BI-9564
目录号 : GC16817A selective BRD9/7 bromodomain inhibitor
Cas No.:1883429-22-8
Sample solution is provided at 25 µL, 10mM.
IC50: 75 nM and 3.4 μM for BRD9 and BRD7 bromodomains, respectively
BI-9564 is a BRD9/7 specific inhibitor.
BRD7 and BRD9 are two important members of the bromodomain family protein. Both BRD7 and BRD9 have been implicated in chromatin remodeling.
In vitro: BI-9564 was identified as a BRD9/7 specific inhibitor via fragment-based screening and structure-guided design. BI-9564 was found to be bind to BRD9 with a higher affinity than to BRD7, and was negative on BET family proteins. In addition, BI-9564 demonstrated in vitro off-target selectivity to CECR2, but not in cells [1].
In vivo: In animal study, BomTac:NMRIFoxn1nu mice were given two oral doses daily and the concentration of BI-9564 in plasma was measured. Dose-dependent AUCs were obtained for BI-9564, achieving exposures that were higher compared to the EC50 level for EOL-1 cells. Moreover, when the oral treatment with BI-9564 at 180 mg/kg was initiated on day 5 and applied daily with an interruption at day 18 and 19, a significant reduction in tumour growth compared to controls was found on day 18 leading to a median tumour growth inhibition value of 52% [1].
Clinical trial: Up to now, BI-9564 is still in the preclinical development stage.
Reference:
[1] Martin LJ et al. Structure-Based Design of an in Vivo Active Selective BRD9 Inhibitor. J Med Chem. 2016 May 26;59(10):4462-75.
Cell experiment: | Cells are grown in 50 µL medium as specified by the supplier for 7 days starting with 500 and with 1000 cells per well of a 384 well plate in the presence of varying concentrations of compound before measuring viability via cellular ATP levels using the cell titer glow assay. |
Animal experiment: | Female CIEA-NOG mice are engrafted intravenously with 1×107 EOL-1 AML cells stably expressing luciferase and GFP. Following injection of the cells animals are randomized based on body weight (n=10/group). Treatment starts on day 5 with either 0.5% Natrosol or BI-9564 formulated with 0.5% Natrosol. All doses are calculated relative to the mouse body weight on the treatment day. BI-9564 and the vehicle control are administered orally with a dosing volume of 10 mL/kg body weight. BI-9564 is administered daily from day 5 until 17 and from day 20 until 22. Dosing is interrupted on day 18 for two days as one mouse in the treatment group reaches -15% body weight loss. Tumour load is measured 2-3 times weekly based on bioluminescence imaging. The following scoring system is used: score 0, no clinical signs; score 1, tail or hind limb weakness. Animals are sacrificed based on severity criteria including appearance of paralysis score 1 and/or body weight loss exceeding -18%. In S54 this tumor mouse model body weight changes can occur due to increased tumor load or due to intolerability. |
References: [1]. Martin LJ, et al. Structure-Based Design of an in Vivo Active Selective BRD9 Inhibitor. J Med Chem. 2016 May 26;59(10):4462-75. |
Cas No. | 1883429-22-8 | SDF | |
化学名 | 4-(4-((dimethylamino)methyl)-2,5-dimethoxyphenyl)-2-methyl-2,7-naphthyridin-1(2H)-one | ||
Canonical SMILES | O=C1N(C)C=C(C2=CC(OC)=C(CN(C)C)C=C2OC)C3=CC=NC=C13 | ||
分子式 | C20H23N3O3 | 分子量 | 353.41 |
溶解度 | DMF: 5 mg/ml,DMF:PBS(pH 7.2)(1:1): 0.5 mg/ml,DMSO: 5 mg/ml,Ethanol: 2 mg/ml | 储存条件 | Store at -20°C |
General tips | 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 储备液的保存方式和期限:-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。 为了提高溶解度,请将管子加热至37℃,然后在超声波浴中震荡一段时间。 |
||
Shipping Condition | 评估样品解决方案:配备蓝冰进行发货。所有其他可用尺寸:配备RT,或根据请求配备蓝冰。 |
制备储备液 | |||
1 mg | 5 mg | 10 mg | |
1 mM | 2.8296 mL | 14.1479 mL | 28.2957 mL |
5 mM | 0.5659 mL | 2.8296 mL | 5.6591 mL |
10 mM | 0.283 mL | 1.4148 mL | 2.8296 mL |
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量) | ||||||||||
给药剂量 | mg/kg | 动物平均体重 | g | 每只动物给药体积 | ul | 动物数量 | 只 | |||
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系GLPBIO为您提供正确的澄清溶液配方) | ||||||||||
% DMSO % % Tween 80 % saline | ||||||||||
计算重置 |
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL saline,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。
3. 以上所有助溶剂都可在 GlpBio 网站选购。
Quality Control & SDS
- View current batch:
- Purity: >99.50%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet