DTPD
(Synonyms: N1,N4-bis(2-Methylphenyl)benzene-1,4-diamine,N,N'-di(o-tolyl)-p-phenylenediamine) 目录号 : GC91533DTPD is a substituted p-phenylenediamine and non-oxidized version of DTPD-Q .
Cas No.:15017-02-4
Sample solution is provided at 25 µL, 10mM.
DTPD is a substituted p-phenylenediamine and non-oxidized version of DTPD-Q .[1] It has been found in water treatment plant influent, effluent, biosolids, and landfill leachates, indoor dust samples, and particulate matter 2.5 (PM2.5) in cities and by roadsides.1,2,3
References:
[1].Zhang, Z.-F., Zhang, X., Zhang, X., et al.Diphenylamine antioxidants in wastewater influent, effluent, biosolids and landfill leachate: Contribution to environmental releasesWater Res.189116602(2021).
[2].Zhu, J., Guo, R., Jiang, S., et al.Occurrence of p-phenylenediamine antioxidants (PPDs) and PPDs-derived quinones in indoor dustSci. Total Environ.912169325(2024).
[3].Wang, W., Cao, G., Zhang, J., et al.Beyond substituted p-phenylenediamine antioxidants: Prevalence of their quinone derivatives in PM[2].5Environ. Sci. Technol.56(15)10629-10637(2022).
Cas No. | 15017-02-4 | SDF | Download SDF |
别名 | N1,N4-bis(2-Methylphenyl)benzene-1,4-diamine,N,N'-di(o-tolyl)-p-phenylenediamine | ||
分子式 | C20H20N2 | 分子量 | 288.4 |
溶解度 | DMSO: Sparingly soluble: 1-10 mg/ml | 储存条件 | -20°C |
General tips | 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 储备液的保存方式和期限:-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。 为了提高溶解度,请将管子加热至37℃,然后在超声波浴中震荡一段时间。 |
||
Shipping Condition | 评估样品解决方案:配备蓝冰进行发货。所有其他可用尺寸:配备RT,或根据请求配备蓝冰。 |
制备储备液 | |||
1 mg | 5 mg | 10 mg | |
1 mM | 3.4674 mL | 17.337 mL | 34.6741 mL |
5 mM | 0.6935 mL | 3.4674 mL | 6.9348 mL |
10 mM | 0.3467 mL | 1.7337 mL | 3.4674 mL |
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量) | ||||||||||
给药剂量 | mg/kg | 动物平均体重 | g | 每只动物给药体积 | ul | 动物数量 | 只 | |||
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系GLPBIO为您提供正确的澄清溶液配方) | ||||||||||
% DMSO % % Tween 80 % saline | ||||||||||
计算重置 |
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL saline,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。
3. 以上所有助溶剂都可在 GlpBio 网站选购。
Quality Control & SDS
- View current batch:
- Purity: >99.50%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet