Sodium carboxymethyl cellulose (Viscosity:300-800mpa.s)
(Synonyms: 羧甲基纤维素钠; CMC-Na (Viscosity:300-800mpa.s)) 目录号 : GC26791Sodium carboxymethyl cellulose (Viscosity:300-800mpa.s) 是羧甲基纤维素的钠盐,常用作黏稠剂,糊料和阻隔剂。
Cas No.:9004-32-4
Sample solution is provided at 25 µL, 10mM.
Sodium carboxymethyl cellulose (Viscosity:300-800mpa.s) is the sodium salt of cellulose arboxymethyl and frequently used as viscous agent, paste and barrier agent.
In Vivo, Protocal for preparing 0.5% CMC-Na Solution
Measure 0.5g of dry CMC-Na and dissolved in 100 ml ddH2O/0.9% Saline (0.9 g NaCl in 100 ml ddH2O) to make a clear solution.
Under the condition of stirring and heating (50-65°C), adding CMC-Na slowly to ddH2O/0.9% Saline helps to accelerate dissolution.
Note
1.You must ensure that your CMC-Na solution does not exist solid-liquid separation phenomenon. The solution is in a uniform and transparent state has no particles in it.
2.Completely dissolution of CMC-Na may requires 4 hours or more longer.
In a pharmacological test, CMC-Na (oral;5% in water; 1 year) is well tolerated in rats[2].
In an acute oral toxicity study in female mice, LD50 of CMC-Na for female mice is 14 g/kg body weight of mice, equivalent to 9.8 g/kg body weight of rat, categorized as practically non-toxic according to Loomis criteria (LD50 5-15g/kg body weight of rat)[3].
Sodium carboxymethyl cellulose (Viscosity:300-800mpa.s) 是羧甲基纤维素的钠盐,常用作黏稠剂,糊料和阻隔剂。
在体内,制备 0.5% CMC-Na 溶液的规程
称量 0.5g 干燥的 CMC-Na 并溶解在 100ml ddH2O/0.9% 生理盐水 (0.9g NaCl 溶于 100ml ddH2O) 中制成澄清溶液。
在搅拌和加热 (50-65°C) 条件下,将 CMC-Na 缓慢加入 ddH2O/0.9% Saline 中有助于加速溶解。
注意
1. 您必须确保您的 CMC-Na 溶液不存在固液分离现象。溶液呈均匀透明状态,无颗粒。
2.CMC-Na 完全溶解可能需要 4 小时或更长时间。
在药理试验中,CMC-Na (口服;5% 水溶液;1 年) 在大鼠中具有良好的耐受性[2]。
在雌性小鼠的急性口服毒性研究中,LD50 雌性小鼠的 CMC-Na 为 14 g/kg 小鼠体重,相当于 9.8 g/kg 大鼠体重,根据 Loomis 标准 (LD50 5) 分类为几乎无毒-15g/kg大鼠体重)[3]。
Cas No. | 9004-32-4 | SDF | |
别名 | 羧甲基纤维素钠; CMC-Na (Viscosity:300-800mpa.s) | ||
Canonical SMILES | [Sodium carboxymethyl cellulose (Viscosity:300-800mpa.s)] | ||
分子式 | 分子量 | ||
溶解度 | H2O : 25 mg/mL (ultrasonic and warming and heat to 60°C) | 储存条件 | 4°C, sealed storage, away from moisture |
General tips | 请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液;一旦配成溶液,请分装保存,避免反复冻融造成的产品失效。 储备液的保存方式和期限:-80°C 储存时,请在 6 个月内使用,-20°C 储存时,请在 1 个月内使用。 为了提高溶解度,请将管子加热至37℃,然后在超声波浴中震荡一段时间。 |
||
Shipping Condition | 评估样品解决方案:配备蓝冰进行发货。所有其他可用尺寸:配备RT,或根据请求配备蓝冰。 |
第一步:请输入基本实验信息(考虑到实验过程中的损耗,建议多配一只动物的药量) | ||||||||||
给药剂量 | mg/kg | 动物平均体重 | g | 每只动物给药体积 | ul | 动物数量 | 只 | |||
第二步:请输入动物体内配方组成(配方适用于不溶于水的药物;不同批次药物配方比例不同,请联系GLPBIO为您提供正确的澄清溶液配方) | ||||||||||
% DMSO % % Tween 80 % saline | ||||||||||
计算重置 |
计算结果:
工作液浓度: mg/ml;
DMSO母液配制方法: mg 药物溶于 μL DMSO溶液(母液浓度 mg/mL,
体内配方配制方法:取 μL DMSO母液,加入 μL PEG300,混匀澄清后加入μL Tween 80,混匀澄清后加入 μL saline,混匀澄清。
1. 首先保证母液是澄清的;
2.
一定要按照顺序依次将溶剂加入,进行下一步操作之前必须保证上一步操作得到的是澄清的溶液,可采用涡旋、超声或水浴加热等物理方法助溶。
3. 以上所有助溶剂都可在 GlpBio 网站选购。
Quality Control & SDS
- View current batch:
- Purity: >99.00%
- COA (Certificate Of Analysis)
- SDS (Safety Data Sheet)
- Datasheet